Not too much progress this week as I am waiting for a new shed/workshop to be delivered. Then the existing workshop will be dismantled and the UMM moved onto the base, which will be it’s parking position.
The painted propshaft was re-fitted and the wiper mechanism and motor have been cleaned, lubed and fitted. The wipers are now working, even the park function. This wasn’t working at first, because I found that the wiring to the motor was a bit puzzling. One pair of wires from the switch had been swapped over. I found out what the correct wiring should be, and corrected it. I also found that there is a connection for intermittent wipe, and the switch supports this. There is no relay, however. I think this would be fairly easy to arrange. I wonder whether anyone has done this on another UMM already?