Not much progress over the last 2 weeks. The weather has been rainy every day. I did manage to do some work in the shed on the brake master cylinder and the servo.
I dismantled the master cylinder and gave it a good clean and inspection. The seals look OK, and there is no corrosion inside, so that is good. I just wire brushed the servo, and then gave both items a coat of paint.
Today, I was able to carry on with the driver’s floor area, where a lot of corrosion was found. This has been cut out and now I am in the process of rebuilding the structure around the floor. Here is the bottom of the door frame.
